Total Pageviews

Showing posts with label movement. Show all posts
Showing posts with label movement. Show all posts

Tuesday, May 31, 2016

Arduino alarm system with delay


   At polish site named http://majsterkowo.pl/ I found an article about alarm system using a Arduino board and PIR sensor.
   Base schematic is 
and sketch for alarm is at page 3 in article.
   After I translate name of variables and study original sketch, I made some changes:
Note: I use internal led from Arduino board instead buzzer.
   
   My sketch is alarm_system_1a.ino and I have next states:
- switch is open, blue led is on, alarm is deactivate;
- switch is close (D2 at GND), green led is blinking, alarm is in stand-by
- after 20 seconds, green led in on, alarm is waitting
- if PIR sensor detect a movement, red led is blinking, alarm countdown 
- after 10 seconds, if switch is still close, red led is on, buzzer is active
- after 10 seconds, alarm return to waitting, if is movement, alarm countdown and repeat the cycle
- if switch is open, system in off.
   You can see a movie named Arduino system alarm with delay with all states: