I wanted to use together with an ESP32 development board and first I search information about this connexion but just two article and an topic on Arduino forum was usefull.
First usefull article was 128×128 Colour LCD to ESP32 from www.xtronical.com. Schematic for connexion is
It used Xtronical ST7735 library derivated from Adafruit ST7735 library... I tested, but I can't display all info in all four modes (0, 90, 180 and 270 degree) even if I change resolution in library as 128x160 not 128x128.
I made 128x160 1.8" TFT display with ST7735 controlled by ESP32 to be more clear
My changed User_Setup.h works fine for me, see in 128x160 1.8" TFT display with ST7735 controlled by ESP32 (2)
Hi Nicu!
ReplyDeleteIt looks like you really like ST7735 screens because you do a lot of sketching with them!
I really enjoyed your ESP32 Clock project but the screens I own are ILI9341 and ILI9488, so I would like to know what I should change or add to the sketch to fit it for my screen, for example, ILI9341 2.8". Thanks
I think is not possible the changes, because is used a custom library... you must search more deep on internet
ReplyDeleteChange lines 626 and 632 in the file XTronical_ST7735.cpp.
ReplyDeleterowstart = 32; to rowstart = 0;. Now your problem should be solved.
Thakyou for the perfect answer!
DeleteThanks for sharing this blog. Very useful Post. Contact STONE Tech for tft lcd modules
ReplyDeletetft lcd modules
Nice blog. Thanks for sharing. Keep sharing!!
ReplyDeleteBuy TFT LCD Panels