3.95" Raspberry Pi display on Arduino Due

   I find a big display: 3.95" = 10cm: original use is for Raspbbery Pi board, but I put at Arduino Due development board because work like RPi with 3.3V logical level voltage... If I (or you) want to use with classical Arduino board (Uno, Mega, Nano, etc) must add two CD4060 chips (hex noninverting buffer)

 or buy another display with  logical interface and made as shield for Arduino board:

   After I talk with Vlad who use Arduino Nano and than Mega, I made next schematic:

    After I was documented, I use MCUFRIEND_kbv library with one example (single who works):

   I tested with good resuls using Arduino IDE 1.6.0, 1.6.6 and 1.8.0 software version on different PC with Windows XP or Windows 10.

   In test the display in Cristhmas period, so I put adequate texts:

  I made some movies, but I recommand you just:

- Raspberry Pi 3.95" display drived by Arduino Due

- Raspberry Pi 3.95" display drived by Arduino Due (2)

Christmas tree with Arduino (2)

   In previous article I made a simple Arduino Chriostmas tree on breadboard with 9 leds, now I use a big piece of cardboard and cutter... I use 21 recovered leds (old leds) on 17 channels (I put 2 red leds in series) as in this schematic

   I use Arduino Nono board with ATmega168 because sketch is small (see christmas_tree_17channels.ino), but hase interesting effects (random leds lite, random delay between commands, random leds off), as in Carton Christmas tree with leds movie:

   After the Christmas tree was adorned I made new movies:

- Chrismas tree (bradut de Craciun)

- Chritstmas tree (bradut de Craciun) - 2

- Chritstmas tree (bradut de Craciun) - 3

- Christmas tree (bradut de Craciun) - 4

- Christmas tree (bradut de Craciun) - 5

Christmas tree with Arduino

   original article

   Inspirred by Doz' Blog and article An Arduino Project: How To Make Flashy Christmas Lights Ornaments I made a Chistmas tree with 9 + 1 leds (9 in tree and one in Arduino nano board).

   Test schematic is

and real test assembly is

   I write 2 sketches, first (christmas_lights_1.ino) chose random the led for power on, wait 50ms, chose random the led for power off, second sketch (christmas_lights_1a.ino) is like first, just change time wirtting as be random from 10 to 100ms.

   I made 3 movie:

- with first sketch and all red leds - Arduino Christmas lights

- second sketch with all red leds - Arduino Christmas lights (2)

- second sketch with various leds - luminite pentru bradul de Craciun (3)

WeMos D1 board (with ESP8266) as Web Switch Control with autoreconnect to wi-fi network

    I tested an (retired now) WeMos D1 development board made with ESP8266EX microcontroller. About this board I found some info at https://www.wemos.cc/product

   For easy use as other Arduino boards, is ok to see this picture:

    Last project with this board is a Web Switch Control.

    For upload a sketch like in any Arduino board must use newish Arduino IDE software from https://www.arduino.cc/en/Main/Software to have this situation:

   For this, must go to FILES -> PREFERENCES

and add http://arduino.esp8266.com/package_esp8266com_index.json adress 

(see detailed data in article Placa NodeMcu v.0.9 programata in Arduino IDE).

    After that in TOOLS -> BOARD->BOARDS MANAGER you will see

and than

   Now, Arduino IDE software is ready for verify/compile and upload the sketch.

   First, I tested a sketch found at ESP8266 Community Forum in post named GARAGE DOOR OPENER EXAMPLE V2 (SEE POST #2). This sketch is writted by JoseAngel

   This sketch made a webserver using AJAX style (static page and just some datas is changes).

   My sketch led_controlled_from_webpage.ino has some change line, but I use same password (1234), and my led is at GPIO5 (D15/SCL) and GND (I not put 220-470 ohms resistor limiter, but is more good to put). I use 8087 port, but you can change to 80.

   I made WeMos board control a led using protected webpage using Ajax movie when you can how it use and control the led:

   After I tested about one mounth, I see some problemes, when wi-fi router is disconnected and reconnect.. so, I study but I give a tip from a collaborator, Mircea Craciun, who indicate my another post from ESP8266 forum.

   Now, my sketch led_controlled_from_webpage_auto.ino made autocreconnect in wi-fi network if apear some problemes.

   I put an LED for wi-fi error at  GPIO12 (D12/MISO) and GND.

   At first start, after restart or if link between router and WeMos is broken, second led blink until link with wi-fi is ok. You can see in ESP8266 Switch control with autoreconnect to wi-fi network movie how WeMos D1 board is working.

   At http://www.esp8266.com/wiki/doku.php?id=arduino-docs I found how I can use EEPROM memory from ESP8266EX microcontroller for store the state of led (ON or OFF) and number of good clicks (just for see how work the system).

   Last sketch, led_controlled_from_webpage_auto_eeprom.ino, has this feature with stored data in EEPROM. You can see that in ESP8266 Switch control with autoreconnect to wi-fi network (2) movie

   

Bibliography:

1) ESP8266 Community Forum - http://www.esp8266.com/

2) Placa NodeMcu v.0.9 programata in Arduino IDE

3) Comanda led de pe pagina web creata cu WeMos D1 (ESP8266)

4) Comanda led de pe pagina web creata cu WeMos D1 (continuare)

Another adjusting clock with alarm, hygrometer & thermometer on 1.8" ST7735 display

   I use feature from article Another adjusting clock with alarm & thermometer using DS3231 on 1.8" ST7735 display and change reading internal temperature of DS3231 with DHT22 senzor (AM2302), but you can use a cheaper and not very precise DHT11 senzor.
   Schematic is now:

   My test montage is

   By using educ8stv_rtctft160_alarm_dht.ino or much better educ8stv_rtctft160_alarm_eeprom_dht.ino sketch, on display you can see: name of day, date, hour clock, hour alarm, temperature and humidity

   In another adjusting clock with alarm, thermometer & hygrometer using DS3231 on 1.8" ST7735 display you can see info on display and hoe change/adjust hour, data, hour alarm, activate and deactivate alarm, etc:

   Alse, I made another movie, named another adjusting clock with alarm, thermometer & hygrometer using DS3231 on 1.8" ST7735 display (2), where I try to explain more detailed the feature of this clock...

FDS-125 display with Arduino (2)

original article

   In previous article I present you how can conect an FDS-125 display to Arduino and how mase a simple, but "static" clock style

   For made an "dynamic" clock, I use some schematic

  I write in exitting sketch to display name of day in week in 2 language (romanian who is my navitve language and in english). It easy to change in your navive language by writting name of days in one line:

  Is very important to have in same subdyrectory of sketch font75.h file like in this picture:

  So, by uploading FDS125_clock1b.ino sketch, you cand see on display new info, beside date:

   In Arduino clock on FDS-125 display (2) movie you can see on FDS-125 display all info:

   After that, I put an AM2302 (DHT22) sensor for humidity and temperature, like in next picture:

   Newest skertch is FDS125_clock_RTC1c.ino and on display you can see new situations:

like in Arduino clock on FDS-125 display (3) movie:

   Because, DHT sensor is too slow when is reading, I made some changes to see temperature and humidity in same times, also I chege font75.h file to display degree symbol instead ': 

  New sketch is FDS125_clock_RTC1c1.ino and this new style can be see it on Arduino clock on FDS-125 display (4)

FDS-125 display with Arduino

original article

   This display was received from Janos Baricz, vintage things passionate. On webworld, we find just some info and tests with FDS-132 display who is bigger than FDS-125.

   So, you can see info about "big brother" at:

- circuitsonline.net - Baco Led Matrix

- FDS132-textdriver library

- arduinoforum.nl: Lichtkrant Surtronic FDS-132

- arduinows.blogspot.com: FDS132 ledmatrixbord

   FDS-125 display has 2 big rows, each with 7 rows and 60 columns (12 matrix 5x7 leds) controlled by Lattice MACH21 microcontroller.

   For control by Arduino must extract Lattice MAC21 microntroller and put few wires like in this pictures from arduinows.blogspot.com:

   Janos made hardware part for this display:

and in this case, situation is:
- green wire is A from FDS-125 display, must connect to D5 pin at Arduino board

- pink wire is B from FDS-125 display, must connect to D6 pin at Arduino board

- white wire is C from FDS-125 display, must connect to D7 pin at Arduino board

- yellow wire is STROBE from FDS-125 display, must connect to D10 pin at Arduino board 

- mauve wire is DATA from FDS-125 display, must connect to D11 pin at Arduino board 

- grey wire is CLOCK from FDS-125 display, must connect to D13 pin at Arduino board 

- blue wire is RESRED from FDS-125 display, must connect to D9 pin at Arduino board 

- black wire is GND from FDS-125 display, must connect to GND pin at Arduino board 

Also, on the back site is power for display (in picture is a red wire connected from power conector at power of display part).

  I redesigned connexion between FDS-125 display and Arduino board:

   After that, I tested some sketches and I "lit" the display

   I put an RTC clock made with DS3231 (works fine with DS1307, also) and adapt an sketch from arduinoforum.nl made for FDS-132. Result is FDS125_clock.ino sketch and test schematic is:

   Whem upload the sketch on display is on top row is data and on bottom row is hour:

   Also, I made Arduino clock on FDS-125 display movie to see how clock is..