Tuesday, November 8, 2016

Adjusting clock with alarm & thermometer using DS3231 on 1.8" ST7735 display

   In previous article I made a clock with manual adjust for date and hour, noow I put a push button for activate and deactivate alarm, also in menu I can change hour and minute for alarm.
   When alarm is activated a small sign and hour for alamr is with whilte
when alarm is deactivated sign and hour is with blue colour.
    When is time alarm (1 minute), if alarm is activate sign is red and LED is lit (instead led you can put a relay module for power a radio, a bulb light, etc)
but if you push ALARM button alarm is deactivade
   Schematic for made this clock is
and the sketch is TFT_DigitalClock_RTC1d.ino.
   I made a movie named adjuting clock with alarm & thermometer using DS3231 on 1.8" ST7735 display when you can see who the clock work:

   PS: I made some changes in last sketch to store hour and state of alarm in EEPROM memory of ATmega, see TFT_DigitalClock_RTC1e.ino !!!
at

28 comments:

  1. AnonymousSeptember 22, 2017 at 9:25 AM

    Hi great job! I succeeded to make this. What happened to the left most side and top side lines that do not be erased to black. Any solutions?? Thanks in advance.

    ReplyDelete
  2. niq_roSeptember 22, 2017 at 10:16 AM

    made a cover ;)

    ReplyDelete
  3. Isabel BentSeptember 27, 2017 at 2:56 PM

    Really very interesting and very valuable information about the Travel Alarm Clocks well done..
    Travel Alarm Clocks

    ReplyDelete
  4. AnonymousMarch 20, 2018 at 10:26 PM

    Hello! Can not program Arduino.https://www.youtube.com/watch?v=loG8Y07n_7M&feature=youtu.be

    ReplyDelete
    Replies
    1. niq_roMarch 21, 2018 at 8:12 AM

      you have all libraries?

      Delete
    2. niq_roMarch 21, 2018 at 9:38 AM

      sorry, now I see messages is "sketch is too big".. maybe You have Arduino with ATmega 168 not 328

      Delete
    3. AnonymousMarch 21, 2018 at 9:47 AM

      I have Arduino with ATmega 328

      Delete
  5. AnonymousMarch 21, 2018 at 9:20 AM

    I think yes. But tell me which one to install and where.

    ReplyDelete
    Replies
    1. niq_roMarch 21, 2018 at 9:24 AM

      who needs in sketch
      #include // https://github.com/Bodmer/TFT_ST7735
      #include // exist in Arduino IDE
      #include "EEPROM.h" // if you not have see https://github.com/arduino/Arduino/tree/master/hardware/arduino/avr/libraries

      Delete
  6. AnonymousMarch 21, 2018 at 9:35 AM

    https://www.youtube.com/watch?v=loG8Y07n_7M&t=4s

    ReplyDelete
    Replies
    1. niq_roMarch 21, 2018 at 9:49 AM

      I tested now, if use Arduino IDE 1.4.0 error is same as yours.. if use Arduino IDE 1.8.6 compile is ok

      Delete
  7. AnonymousMarch 21, 2018 at 10:13 AM

    I installed Arduino 1.8.5. and how is it obtained. How is the temperature measured?

    ReplyDelete
    Replies
    1. niq_roMarch 21, 2018 at 12:32 PM

      temperature is from DS3231 chip.. is sensor inside of DS3231

      Delete
  8. AnonymousMarch 21, 2018 at 1:29 PM

    I'm trying to upload the file: TFT_AnalogClock_RTC, but it gives me the following error: exit status 1 Error compiling for board "Arduino/Genuino Uno".Help
    Video:https://www.youtube.com/watch?v=xOoxylDf2bo

    ReplyDelete
    Replies
    1. niq_roMarch 21, 2018 at 1:40 PM

      maybe I not have all libraries.. I don't remember all programs I wrote.. give me link for sketch

      Delete
  9. AnonymousMarch 21, 2018 at 2:01 PM

    https://www.youtube.com/watch?v=I1GVDt3OzIs

    ReplyDelete
    Replies
    1. niq_roMarch 21, 2018 at 3:15 PM

      you need have RTClib library... I think I use from https://github.com/adafruit/RTClib
      test

      Delete
  10. AnonymousMarch 21, 2018 at 4:06 PM

    Thank you! Get it. And one more thing - trying to load the file: educ8stv_rtctft160_alarm, gets this: https://www.youtube.com/watch?v=yI0tP0kJOEw&t=7s.Link:http://arduinotehniq.blogspot.bg/2016/11/another-adjuting-clock-with-alarm.html

    ReplyDelete
    Replies
    1. niq_roMarch 21, 2018 at 4:39 PM

      clear.. you need Adafruit_GFX library :)))))
      please first learn with easy projects as blinking led...

      Delete
  11. AnonymousMarch 21, 2018 at 4:48 PM

    Thanks for the help!

    ReplyDelete
  12. AnonymousMarch 21, 2018 at 5:12 PM

    Yes.Thanks

    ReplyDelete
  13. AnonymousMarch 21, 2018 at 5:58 PM

    Could this project be transferred to the Atmega 328 DIP and if so how?Video:https://www.youtube.com/watch?v=7EGG4osSZDI

    ReplyDelete
    Replies
    1. niq_roMarch 21, 2018 at 9:42 PM

      of course, see ATmega328 pin mapping - https://www.arduino.cc/en/Hacking/PinMapping168 - and minimal circuit - https://www.open-electronics.org/arduino-isp-in-system-programming-and-stand-alone-circuits/

      Delete
  14. AnonymousMarch 22, 2018 at 3:58 PM

    The project with Atmega328 is ready. On pins 9 and 10 I put quartz 16 megahertz.As such will work well scheme or I need to put another and if so from how many megahertz Video:https://www.youtube.com/watch?v=zewfz6hmOpg

    ReplyDelete
  15. UnknownNovember 21, 2018 at 3:11 PM

    very nice project

    how to modify the sketch for showing "seconds" of clock
    Thanks.

    ReplyDelete
    Replies
    1. niq_roNovember 21, 2018 at 9:42 PM

      you must study the sketch... is an old project and I haven't free time to adapt the sketch...

      Delete