Total Pageviews

Wednesday, May 20, 2015

Arduino thermostat with 2 thresholds on 4 digit 7-segment display

   This thermostat with few components has same schematic with previous thermostat:
 
   Few pics with Arduino Mega board (must just few changes in sketch for works with Uno or Mega):
- desired temperature is ok:
- actual temperature is less than desired temperature:
- actual temperature is much than desired temperature:
   After push the MENU button, low threshold can be set:
and if I push the "-" button value is decrease with 1 degree Celsius at every push and if I push the "+" button value is increase with 1 degree Celsius at every push.
   If I push MENU button, high threshold can be set:
and if I push the "-" button value is decrease with 1 degree Celsius at every push and if I push the "+" button value is increase with 1 degree Celsius at every push. If high threshold is set less low threshold, Arduino automatically change high threshold = low threshold + 1 degree Celsius.
   Sketch for this thermostat is put at https://github.com/tehniq3/!
   For best results, I use internal reference (1.1V) and for Arduino Uno board in sketch must see:
and for Mega board must comment fisrt line and uncomment next line !!!
   Fist time when upload the sketch, must write default value for low and high thesholds:
after that must put comments and upload the sketch again:
   I made a movie with this thermostat, named Arduino thermostat with 2 thresholds

6 comments:

  1. Hello, nice just what i'm looking for, can u add a relais in the code so i can use it as a thermostate?

    ReplyDelete
  2. sketch is ready as thermostat.. connect relay module at A4 for heather thermostat or at A5 for cooler thermostat... ;)

    ReplyDelete
  3. Thanks for sharing the article. It would be helpful.

    Heating and Cooling Mississauga

    ReplyDelete
  4. This article is so helping. Thanks for sharing it.

    Heating and Cooling Toronto

    ReplyDelete


  5. Great post you shared, you have now become top of my list. You were unknown to me before but have found your content to be fantastic.

    So great work for informing us of the possibilities and following a certain path.

    I really appreciate your hard work an giving us some information and inspiring others to follow.

    Thanks so much.

    I hope for more post in the future.



    Open Frame Touch Monitor

    ReplyDelete
  6. These tips for heater diagnostics are kinda helpful. Thanks for sharing the article.
    http://www.cosmopolitanmechanical.ca/

    ReplyDelete