I wanted to use together with an ESP32 development board and first I search information about this connexion but just two article and an topic on Arduino forum was usefull.
First usefull article was 128×128 Colour LCD to ESP32 from www.xtronical.com. Schematic for connexion is
It used Xtronical ST7735 library derivated from Adafruit ST7735 library... I tested, but I can't display all info in all four modes (0, 90, 180 and 270 degree) even if I change resolution in library as 128x160 not 128x128.
I made 128x160 1.8" TFT display with ST7735 controlled by ESP32 to be more clear
My changed User_Setup.h works fine for me, see in 128x160 1.8" TFT display with ST7735 controlled by ESP32 (2)
Hi Nicu!
ReplyDeleteIt looks like you really like ST7735 screens because you do a lot of sketching with them!
I really enjoyed your ESP32 Clock project but the screens I own are ILI9341 and ILI9488, so I would like to know what I should change or add to the sketch to fit it for my screen, for example, ILI9341 2.8". Thanks
I think is not possible the changes, because is used a custom library... you must search more deep on internet
ReplyDeleteChange lines 626 and 632 in the file XTronical_ST7735.cpp.
ReplyDeleterowstart = 32; to rowstart = 0;. Now your problem should be solved.
Thakyou for the perfect answer!
DeleteThanks for sharing this blog. Very useful Post. Contact STONE Tech for tft lcd modules
ReplyDeletetft lcd modules